MICROICETER (Gr. mikros, little; metron, measure) is an instrument used for the measurement of minute ilistances and angleS. Its different forms, depending on different principles, may be divided into two sections; according as they are applied to physics or astronomy. Of the former section are the vernier (q.v.) and the micrometer screw, the latter instrument being merely a screw with a very regular thread, and a large round head,which is carefully graduated, generally to sixtieths, and furnished with an index. It is easily seen that if a complete turn of the screw advance its point Ath of an inch, a turn sufficient to pa,ss the index from one g-raduation to another will only advance it -1-,vinth of an inch, etc, This is the micrometer used iu the construction and graduation of instru ments. Of those applied to astronomical purposes, the most simple is a short tube, across the opening of which are stretched two parallel threads, which are moved to or from each other by screws. These threads are. crossed by a third perpendicularly, and the
whole apparatus is placed in the focus of a, lens. The distance of two stars is found by adjusting the two parallel threads, one to pass through the center of each star, taking care that the threads are placed perpendicular to the line joining the stars, and finding how many turns and parts of a, turn of the screw are required to bring the wires to coin cide. The angle of position of two stars is also obtained by turning round the instru ment till the third wire, which is normally horizontal, bisects both stars; and reading off on the circumference the arc passed over. Fraunhofer's suspended annular micrometer consists merely of a steel ring surrounded by a flat rim of glass, and the position of the star is deduced from the time when it crosses the ring, and its path while within it. The abbe Roehon substituted for the wire micrometer one made of two prisms of rock crystal or Iceland spar, capable of double refraction.