31032. This is a bullet for the .32 Swiss Ordnance. It is not used larger, but is reported very excellent for large game.
.311 is the proper diameter of bullets for the following, arms: .303 English rifles; .32-20 Winchester, Marlin and Colt's rifles ancl pistols; .32-35 Stevens and Maynard; .32-4o Bullard, etc. All bullets of the .311 diameter may be sized to .308 for the .3o caliber.
31111. This is the regular standard Lr. M. C. bullet for .32-2o Marlin and Colt's. It has but one g-roove, IN ith point same shape as 3118. Any reloading; tool for .32-2o will seat it. May be sized to .3oS. (For sharp-pointed bullets see No. 308(2.) 31 113. This is a round ball for light charge, short range, or small game. Too much powder v% ill cause bullet to jump the rifling. With proper amount of powder they do good work.
31114. Idere is a fine variety of bullets with wide, square grooves for lubrica tion. Excellent reports come from parties using them in both .3o and .32 caliber rifles.
311157. This is the same shape as the .32-40 Marlin 165, and is used with general satisfaction for large game.
31125._ This is a bullet made especially for the .302 English rifles, and is the same shape and length as the metal jacketed bullet in the .303 Eley cartridge. Weight, 240 grains.
31133. Express bullet. They increase the killing powers of the .32-20 rifles greatly, and are correct shape for any of the regular .32-20 reloading tools.
31142. This is a bullet from Cylindrical mould. Cast smooth for patching. Mould can be made for casting round, flat, or Leopold point. Same will cast bill lets of various weights.
' 3117. This bullet is the old standard .32-35-153 for Stevens and Maynard rifles, and is a favorite.
3118. This is the regular standard bullet, .32-2o-115 Winchester. It has two grooves, and is same shape at point as the No. 31111. Any reloading tool that is correct for .32-2o cartridges will seat it. May be sized to .308.
.313 is the proper diameter for bullets for the following: .32-30 Remington ; .32 S. & W. Short; .32 S. & W. Long; .32 Harrington & Richardson ; .32 Merwin
& Hulbert; .32 Colt's New Police, etc.
31355. This is the regular .32 S. & W. Short. (See Smith & Wesson Re ' volyers.) 31356. This is the regular .32-30 Remington. (See Remington Arms.) 31357. This is the .32 Colt's New Police, and .32 S. & W. Long. (See Colt's Arms and Smith & Wesson Revolvers.) 31358. Round ball for light charge or short range practice. Too much powder will cause them to jump the rifling. The proper charge will do good work.
315158. This is a special bullet used by some shooters ; in the .32-40, .319 rifles it requires a thin paper patch. It is also the correct diameter for the Mann 1.e rifle, 8 m/m.
.319 is the proper diameter of bullets for all arms using the well-known and culiar cartridge .32-40 Marlin, which was first 'originated by the Marlin Fire rms Co. and adopted by the Winchester, Remington, Colt's, Stevens, and others. !There are also other cartridges known as .32-40 Remington (.308) and .32-40 Bullard (.3u), but they require different diameter of bullets. The cartridge using the .319 bullet should always be designated as .32-40 M. and W., whatever ifle is made to use them. This will obviate many mistakes.
319162. This is a bullet that has won a place in the hearts of the users of the 32-40 rifles, using shell full of powder and seating bullet in the barrel.
3194-1. This is the regular standard .32-40-165 bullet, and has an excellent reputation.
31945. Express bullet. This is the same shape as the standard, so it will seat properly with the regular reloading tool. It increases the killing power of the rifle greatly for deer, bear, etc.
31946. This bullet has one very wide groove for lubrication with two strong bands. It is claimed that this bullet shoots well, does not strip or jump the rifling r at higher velocities, consequently does not lead the barrel. The shape is standard and correct for the regular reloading tools.
31947. Here is a fine series of bullets. They are standard shape at the point. Short or long range. All seated with the regular tools.