36o73. This is the same bullet as 36072, with the exception of the flat point and hollow base, which is preferred by many, and which also helps the bullet to expand. These bullets have been favorably reported, when used in the .38 Colt's Navy.
31/074. Round ball, for .38-44 S. & W. Gaiter), and other arms using this size. 36275. This bullet is correct for some of the old style .38 Stevens and Maynard. There are quite a number of old rifles using bullets of this size.
370163. This is a special bullet used by some in arms for the .38-55 by patch ing, to .375 diameter.
.373 is the proper diameter of bullets for the .38-45, .38-5o Remington and .38-45 Ballard rilles, though the .375 bullets are used in them extensively.
37.3I6-t. This is the .38-45-190 Bullard. Bullard rifles are not made now, but many of them are still in use.
373165. This is the standard bullet for the .38-40 and .38-5o Remington rifles (See Remington Arms.) .375 is the correct diameter of bullets for all arms using the very popular car tridge .38-55 Marlin. This cartridge was first originated by the Marlin Fire Arms Co. and has been adoPted bv nearly all other makers of rifles. .375 is also correct for the following cartridges: .38-56, 38-70, .38-72, .38-9o. The shape of bullets for all of these cartridges is the same as the .38-55-255 (except the .38-72, which has round point), and will interchange and seat properly with the regular tools. • 375166. This is the factory .38-33o grooved bullet. It is used with a shell full of powder for target work.
375167. This is the .38-72-275 Winchester. The point being round, it requires chamber to fit it.
37576. This is the standard .38-55-255 bullet. It will seat correctly in tools for above cartridges. One band off is the regular .38-90-217 Winchester.
37577. Express bullets. They add greatly to the killing powers. The .38-55 rifle with express bullets are sure killers of deer and elk. These bullets are of the standard shape and will seat correctly in the regular tools.
3757g. This bullet has one wide, deep groove for lubrication and two strong bands. It is claimed to be an aceurate flier. also that it will not strip and lead the barrel if shot at a hig,her velocity. It has a round point similar to No. 3758i. '
37579. This series of bullets has many friends. They have wide, deep grooves, point is short. makim; nice, light weight bullets.
375go. Excellent reports come from this bullet as a very accurate one. It was desig-ned by a sea captain, and has been used successfully in shooting. large fish.
3758t. This bullet is similar to the standard .38-255, except that the point is round, same shape as No. 37578.
37582. This is a fine short range bullet, and requires a special chamber to seat it.
37584. This is a popular series of bullets for both short and long range. The shape of point is standard. They scat all right in the regular tools.
37585. This is a fine series of sharp pointed, heavy and light weight bullets. They are accurate fliers. With the lighter ones, squirrel and other small g-ame may be killed without mangling.
37586. This bullet was designed by, the Zettler boys, of the Zettler Rifle Club, New York City. It has many friends. It is not the same diameter the whole length; the three base bands are .005 of an inch above the standard size, so they cannot be seated in the regular shell without being sized.
37587. Round ball, for light charge of powder, for small game, short range or indoor practice. Too much powder will cause them to jump the rifling; with proper quantity they shoot very nicely, 37588. This is the famous Rabbeth bullet. It is a record maker and is used with Chase patch.
37589. This is an illustration of bullet from Cylindrical adjustable mould. Bullet is cast smooth for paper patching. Mould will cast bullets of varying lengths, with flat, round, or Leopold point.
.386 is the proper diameter of heel of outside lubricated bullet to fit the .41 Colt shells. .4o6 is the size of the large diameter that fits the barrel.
386176. This is the old style .41 short Colt's 0, L. bullet. No. tool only.
(See Colt Arms.) 386177. This is the old O. L. .41 Colt's long. No. tool only for loading this. (See Colt Arms.) 386178. This is the new .41 Colt's long inside lubricated. The shells are longer than the old style and the bullet has a hollow base to expand at discharge to fit the barrel.